Hello,
I'm currently trying to fabricate the following board TIDM-02008
As you maybe know, this board is not available all assembled so I need all the fabrication files to send It to my PCB manufacturer (JLC PCB).
And the manufacturer need 3 type of files in order to proceed to the fabrication which are : Gerber file, Bom in CSV format and CPL (Component Placement List) or pick and place (depending the design software used) in CSV format.
But on the concerned page online (TIDM-02008 reference design | TI.com), as you can see on the section "reference design" there is no "bom.csv" and "cpl.csv" files (only a BOM file but in PDF).
My question is : is It possible to have BOM and CPL/Pick and place in CSV format ? And/or the schematic and board file in Altium, so we can generate them on our own, please ?
Thank you in advance for your responses.
Kindly regards,
SAMUEL Pierre-Aroul
