TMDSCNCD280049C: How to program "TMDSCNCD280049C" eval board with the external programmer XDS110 JTAG Debug Probe.

Hi,

This page has guidelines for JTAG pin connections. You will only need TCK, TMS, TDI, and TDO for 4-pin JTAG. You would need TMS and TCK for cJTAG. You would also need GND for either pinout. https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds_target_connection_guide.html#buffered-case

This page has instructions for setting up your target configuration file: https://software-dl.ti.com/ccs/esd/documents/users_guide/ccs_debug-main.html

Best Regards,

Ben Collier