CCSTUDIO3: CCS3.3 running on windows 11

david goodin

Part Number: CCSTUDIO3

I have CCS3.3 running on windows 10 using the instructions I found here. Now I have windows 11. I installed as was done with Windows 10. However, after splash screen comes up, and the emulator enumeration happens, then the splash screen disappears and CCS3.3 does not start. There is nothing in the task manager either.

Anyone have any luck with windows 11 and DDS3.3?

Thanks

4 months ago

0 Benjamin Collier 4 months ago

TI__Mastermind 24766 points

Hi,

Just curious, why do you want to use CCS 3.3?

0 david goodin 4 months ago in reply to Benjamin Collier

Intellectual 370 points

I haven't found any other way to develop code for TMS320F2406 and emulate with a Spectrum Digital XDS510USB pod.

If I missed something along the way, please do tell...

David

0 Benjamin Collier 4 months ago in reply to david goodin

TI__Mastermind 24766 points

Ok, let me see if I have the same issue with CCS 3.3 and windows 11.

0 Benjamin Collier 4 months ago in reply to Benjamin Collier

TI__Mastermind 24766 points

Hi,

I actually do not have a windows 11 machine on which I can try this.

I was made aware of this page: https://software-dl.ti.com/ccs/esd/documents/ccs_ccs33-windows10.html

Best Regards,

Ben Collier

0 david goodin 4 months ago

Intellectual 370 points

Yep, that page you referenced was what what I Refered to for installing 3.3 on my windows 10 machines. Works fine. Didn’t figure windows 11 would be all that different. Perhaps I was wrong…

0 Benjamin Collier 4 months ago in reply to david goodin

TI__Mastermind 24766 points

Yeah, I'm sorry about any issues you have experienced, but F2406 is a very old device and so our debug chain for this device is no longer supported. I would recommend switching to a new device if possible for better price and features.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCSTUDIO3: CCS3.3 running on windows 11