LAUNCHXL-F28069M: LAUNCHXL-F28069M + BOOSTXL-BUCKCONV Sample code in CCS (C2000Ware/powerSUITE) doesn't work

Sven Sachs

Prodigy 20 points

Part Number: LAUNCHXL-F28069M
Other Parts Discussed in Thread: BOOSTXL-BUCKCONV, C2000WARE, CONTROLSUITE

Hi,

as shown in the video:

link.brightcove.com/.../bcpid3917207363001

I have ordered a LAUNCHXL-F28069M LaunchPad and a BOOSTXL-BUCKCONV LaunchPad.

But after installing CCS and following the steps from the video I saw that the example code is for the F280049C LaunchPad.

If I want to run the code I get the following error message in the Console:

"C28xx: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map."

Is there an example code for the F28069M LaunchPad you can provide me with?

Will the F28069M LaunchPad also be supoorted in the CCS Resource Explorer in the near future?

Best regards

Sven

7 months ago

0 Aswin P 7 months ago

TI__Expert 6451 points

Hi Sven,

Please have a look at the bitfield examples present in the C2000Ware SDK - C2000Ware_5_02_00_00\device_support\f2806x\examples\c28

You can try out those examples and take reference to run the examples in launchpad.

Thanks

Aswin

0 Sven Sachs 7 months ago in reply to Aswin P

Prodigy 20 points

Hi Aswin,

unfortunately this is a somewhat unsatisfactory answer.

I know this example files, but they are more or less "stand alone" files for ADC or EPWM.

I want to know if it is possible that you can support me with an usable whole project as described in your promotion video?

I just want to do the same steps as described in your video to learn about using buck and software control loop to include this in my actual industrial hardware project.

Thank you for your support.

BR Sven

0 Aswin P 7 months ago in reply to Sven Sachs

TI__Expert 6451 points

Hi Sven,

I will reassign the query to our experts.

Thanks

Aswin

0 Sven Sachs 7 months ago in reply to Aswin P

Prodigy 20 points

Hi,

thank you very much for this.

0 MatthewPate 7 months ago in reply to Sven Sachs

TI__Guru* 75800 points

Sven,

This kit has F28069 support in our legacy tool suite: controlSUITE

the path is C:\ti\controlSUITE\development_kits\BOOSTXL_BUCKCONV\v1_01_00_00\Buck_VMC_F28069M after install.

We have academy support for the F28069 device here https://dev.ti.com/tirex/explore/node?node=A__AYas8evPnY9.TREO8pS2Ew__C2000-ACADEMY__3H1LnqB__LATEST

You mentioned resource explorer support for this device, did you mean for this kit explicitly or in general? Examples should be here https://dev.ti.com/tirex/explore/node?node=A__AAwSlnAtRhPegReA8LB-DA__C2000WARE__1kRFgrO__LATEST

Let me know if this helps.

Best,

Matthew

+1 Sven Sachs 6 months ago in reply to MatthewPate

Prodigy 20 points

Hi Matthew,

thanks a lot for your answer to my question.
That helps me a lot!
Especially the tip with the path in controlsuite helped me a lot.

Just one more question:

Is there also an example project or file path where I can change the grey parameters in the main.cfg file?
Please take a look in the picture there are some settings grey and I can not change them.
What should I do if I want to change them?

BR Sven

0 Sven Sachs 6 months ago in reply to Sven Sachs

Prodigy 20 points

Me again

I have found the path with the cusomable settings.

Thanks

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28069M: LAUNCHXL-F28069M + BOOSTXL-BUCKCONV Sample code in CCS (C2000Ware/powerSUITE) doesn't work