TMS320F28379S: TMS320F28379SZWTT

ian cartwright

Part Number: TMS320F28379S

Hi, I have a design using the TMS320F28379SZWTT device and the s/w is done in Matlab/Simulink.

Hopefully a simple question! I have one o/p GPIO16 that is outputting a 500Hz square wave, but in my model I have GPIO16 connected to a constant block, which I can change between 0 & 1 but this makes no difference and it always o/ps the square wave. The h/w settings for the GPIO port look correct and are the same as all the other GPIO o/ps that are working correctly.

Is there a way to see if anything else is using this GPIO?

Thanks

Ian

8 months ago

0 Joe Prushing 8 months ago

TI__Genius 13861 points

Hello,

Please take a look at MathWorks FAQ at this link below:

If you have further questions, the best way to get support on MathWorks products is to contact MathWorks live tech support.

You can also search for answers or post a question on MATLAB Answers C2000 forum. Additionally, there is info on MathWorks support C2000 in Documentation and Examples.

I will close the thread from here as the software is supported by MathWorks team on their forum.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379S: TMS320F28379SZWTT