This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28069M: Compilation does not pass. xds100 is not recognized.

Part Number: LAUNCHXL-F28069M
Other Parts Discussed in Thread: CONTROLSUITE,



I would like to run a control program using the F28069M Launch Pad.
The development environment is as follows.
OS: windows 11
I am using Code Composer Studio Version:

I am trying to run the ControlSuite sample program Example_2806xFlash while reading the attached document, but an error occurs. I am having a very hard time understanding what the error is.

Please let me know if you have any good sample programs.
Also, when I connect the USB, it should recognize the xds100, but it does not.
Please let me know if there is any countermeasure.

Is it perhaps difficult to develop the F28069M with ccs12?

Thank you in advance.