This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28379D: CLA1TASK1 doesnot contain frame information

Part Number: LAUNCHXL-F28379D

Tool/software:

Dear Staff

I am trying to debug the CLA with CPU, But when the program run in the CLA, it halted, and show CLATASK1 doesnot contain frame information. see the picture below.

I am almost desperate as I have debuged for two days, i attached the project file as well. thank you so much.

 10CLA.zip

  • Hi Jinghang,

    Can you try connecting/loading your program in the following order:

    1. Launch target configuration
      1. all cores should be disconnected
    2. "Connect Target" for the c28x
      1. c28x will be suspended  
      2. It may throw an error about not having the debug information at this point, that can be ignored
    3. Load the .out file onto the c28x (Run >> Load >> Load Program >> [navigate to the .out file])
      1. c28x will be suspended still
    4. "Connect Target" for the CLA
      1. both cores will be suspended
    5. Load the .out symbols onto the CLA (Run >> Load >> Load symbols >> [navigate to the .out file])
    6. Switch context to the c28x (click on it in the debug window) and Resume

    Also do you have any breakpoints in the CLA task code that it is hitting?

    Best Regards,

    Delaney