HI
I got a board to reverse engineer.This board is located on the TMS320F240.
HOW I flash-eeprom reading this device .
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI
I got a board to reverse engineer.This board is located on the TMS320F240.
HOW I flash-eeprom reading this device .
I want to know What do you program on flash tms320f240.
I think I want reading the tms320f240 flash and program on a another tms320f240. What should I do?
I did it with the jtag? Or should I write an algorithm for programing new tms320f240
Amir,
I don't understand why you need to read a F240 device and re-program on another F240 device. If you had the source file / Coeff to be programmed you should be able to program the flash with the tools provided in the following webpage (http://www.ti.com/tool/ftlf240x).
Regards,
Manoj
hi dear
very thanks for your kindly response.
i have a question about. tms320f240
i want to know it has a lock bit or no.my mean is dose it has lock bit for prevent to access the flash memory?