LVSERVOMTR: Wire connections between LVSERVOMTR, TMS320F280025C and BOOSTXL-DRV8323RH

Hi Hengchen,

Are you basing this off some reference design? Can you indicate what modules on the F280025C device are connected to the LVSERVOMTR motor?

Thank you,

Luke

Hi Luke,

My test comes from document named 'Motor Control SDK Universal Project and Lab.pdf', according to section '3.2.9 BOOSTXL-DRV8323RH Setup', and i just want to run this lib usage project on board first, to know how it works first, but i'm stucked here. After i connected DRV8323RH to F280025C, i don't know how to connect them to the motor

Thanks,

Hengchen

Hi Hengchen,

I will reassign this thread to one of our universal motor control lab experts, please expect a response back by tomorrow.

Thank you,

Luke

Hi Luke,

Thanks,

Much appreciate,

Hengchen

Hi Hengchen,

Below is the motor's datasheet. There should be an adapter wire from Molex mini-fit (shown in page 3) to encoder header and phase wires in the LVSERVOMTR kit. Then you can connect the three phase wires of the motor to the DRV terminal. 

/cfs-file/__key/communityserver-discussions-components-files/171/2337.N23_5F00_Industrial_5F00_Grade_5F00_Motors_5F00_v6.3.pdf

Thanks,

Jiaxin