• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 266 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28035: Interrupt sources

MM
Prodigy 160 points

Part Number: TMS320F28035

Tool/software:

Hi,

The TMS320F28035 has three dedicated external interrupt lines XINT1, XINT2, XINT3 which are are controlled by the GPIO configuration control registers.

Is it possible to have more than three external interrupts on the TMS320F28035 microcontroller?

Thank you

  • +1
    TI__Genius 17396 points

    Hi Mrudu,

    No it is not possible to change the number of XINT channels for the device, it has 3 XINT mapped to interrupt controller in design and cant be changed.

    Other newer devices like F28003x have upto 5 XINT channels mapped to the Interrupt controller.

    Thanks,
    Prarthan.