TMS320F28P559SJ-Q1: CAN configuration issue with sysconfig

Joe Ji

Part Number: TMS320F28P559SJ-Q1
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

Hi team

Customer use 2 channel CAN (MCAN0 MCAN1) in the project. They feedback 2 issues, using sysconfig to config CAN:

1. Once config the standard Filter Elements to 10 or any other number but not 0, the MCAN1_init function body cannot be generated by sysconfig.

2. MCAN0 and MCAN1 Standard Filter Elements used cannot be configured as the same value for example MCAN0 configured 1~10, MCAN1 cannot be configured as 1~10.

Thanks

Joe

2 months ago

0 Joe Ji 2 months ago

TI__Intellectual 2675 points

Hi team

Kindly follow up this thread.

Thanks

Joe

0 QJ Wang 2 months ago in reply to Joe Ji

TI__Guru**** 192316 points

Hi Joe,

Thank you for pointing this issue out. I produced the same problem with sysconfig 1.21.

0 Joe Ji 2 months ago in reply to QJ Wang

TI__Intellectual 2675 points

Hi QJ

Joe Ji said:
2. MCAN0 and MCAN1 Standard Filter Elements used cannot be configured as the same value for example MCAN0 configured 1~10, MCAN1 cannot be configured as 1~10.

for the second question, is it a sysconfig bug or is it a limitation of the CAN IP?

Could you please kindly check with SW team whether they will fix the issue in next version sysconfig, and update time?

Thanks

Joe

+1 QJ Wang 2 months ago in reply to Joe Ji

TI__Guru**** 192316 points

Hi Joe,

I have submitted a Jira ticket. The bugs should be fixed in the future release.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28P559SJ-Q1: CAN configuration issue with sysconfig