• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 107 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280049C: TIDM-SOLAR-DCDC SFRA not connected

Ali Salem
Prodigy 10 points
Part Number: TMS320F280049C
Other Parts Discussed in Thread: SFRA, TIDM-SOLAR-DCDC

Tool/software:

Hello 

We tried to run the example of f2800x_mppt_dcdc of reference design tidm-solar-dcdc in CCS into the launchpad without doing any modifications but it couldn’t connect to the SFRA GUI, we checked the sfra configurations in the code and everything looks well. Also we tried to connect another example from the SFRA examples to check if the problem is from our launchpad or its connection and it is connected without any issues.

  • 0
    TI__Intellectual 1240 points

    Ali,

    Did you follow below steps, while connecting to GUI after running the firmware!
    Entering correct baud rate, COM Port selection correctly and unchecking the "Boot on connect"

    If yes! Can you provide snippet of tool with disconnect message, that would help in easier debug!

    Thanks,

    Shashank

  • 0 in reply to Shashank Madineni
    Prodigy 10 points

    Hi Shashank,

    Yes all these steps are followed and still the same problem. Below are the snippets of the GUI and the message. 

    Note: Same launchpad is working fine with "example1_stb_f28004x_f32_tmu_eabi" example and SFRA is connecting well.