LAUNCHXL-F28069M: Adapting MotorWare Project Labs for BOOSTXL-3PhGanInv with LaunchXL-F28069M

Marco Lasagni

Part Number: LAUNCHXL-F28069M
Other Parts Discussed in Thread: TIDA-00909, TIDA-00913, BOOSTXL-3PHGANINV, , MOTORWARE, LAUNCHXL-F28027F, DRV8301

Tool/software:

Dear Texas Instruments Team,

I am using the LaunchXL-F28069M with the BOOSTXL-3PhGanInv. Following the instructions provided in the TIDA-00909, TIDA-00913, and BOOSTXL-3PhGanInv documentation, I am able to test only Lab 2a from the MotorWare labs.

I was wondering if it is possible to test other labs as well. Is there a way to adapt the various labs to work with the LaunchXL-F28069M or alternatively with the LaunchXL-F28027F?

Thank you in advance for your support, and I look forward to your kind response.

Best regards,
Marco Lasagni

6 months ago

0 Yanming Luo 6 months ago

TI__Guru** 115130 points

Marco Lasagni said:
I was wondering if it is possible to test other labs as well. Is there a way to adapt the various labs to work with the LaunchXL-F28069M or alternatively with the LaunchXL-F28027F?

Yes. You need to change the device configuration codes according to the hardware you are using.

0 Marco Lasagni 6 months ago in reply to Yanming Luo

Prodigy 65 points

Hi,

Thank you for your response.

To understand better, starting from a Lab project made for the DRV8301 and F28069M, should I follow a similar procedure as indicated in the above-mentioned TIDAs, modifying the HAL and the "main"?

Alternatively, are there any Labs besides 2a for the BOOSTXL-3PhGaNInv that are compatible with the F28069M or F28027F?

Thank you.
Best regards,
Marco Lasagni

0 Yanming Luo 6 months ago in reply to Marco Lasagni

TI__Guru** 115130 points

Yes, you should make sure that the changes are correct according to the board you are using.

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28069M: Adapting MotorWare Project Labs for BOOSTXL-3PhGanInv with LaunchXL-F28069M