Tool/software:
Hello,
I created with the SSC Tool an EtherCat Project for TMS320F28388D.
I checked on my hardware and on TMDSCNCD28388D, but the Yellow LED is on if Cable is plugged in and the green LED is on, if nothing is plugged and is blinking when there are communication activitiies on the bus.
For ethercat conformance the led behaviour need to be: Green of, when communication than blinking, yellow always off.
Is there a possibility to Configure the ESC so that the LED changes its polarity(green LED) or switch continous off (yellow)
Thank you for your help.
Kind regards,
Markus
