• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 82 subscribers
  • Views 154 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LAUNCHXL-F28P55X: Fails to re-initialize the MCAN interrupt after first trigger

F28M36P63C2: [Bug Report] MCAN Interrupt is not triggered under debug session F28P55X

Siu Ho
Prodigy 120 points

Other Parts Discussed in Thread: C2000WARE

Hi, 

I am developing the MCAN protocol with the C2000Ware(6.00.00.00) SDK with the F28P55X dev-kit.

I have noticed the configured interrupt line is not entered during debug (Tx and Rx FIFO event) and I can only varify if the interrupt is triggered by toggling a GPIO pin.

Could you please look into it?

Thanks,

Siu