• State
  • Replies 3 replies
  • Subscribers 83 subscribers
  • Views 94 views
  • Users 0 members are here
Support feedback
Options
Options
Related

F28E120SB: Motor Control lab

Milind Bapat
Intellectual 325 points
Part Number: F28E120SB
Other Parts Discussed in Thread: C2000WARE, MOTORCONTROL-WORKBENCH-GUI, LAUNCHXL-F28E12X, DRV8329AEVM, BOOSTXL-DRV8323RH, TIEVM-MTR-HVINV

I am considering buying the LAUNCHXL-F28E12* card along with relevant motor control hardware for PMSM motor control, however, after installing C2000 and C2000ware, I found out that the demo code for sensorless PMSM motor control is not there. Can somebody point out if TI has released relevant code? Also when the chip will be available? 

  • 0
    TI__Intellectual 1030 points

    Hi Milind,

    I apologize for the late response, do you still require support? 

    Kind regards,

    AJ Favela 

  • 0 in reply to AJ Favela
    Intellectual 325 points

    Yes, I want to buy the kit and start experimenting, but do not know how to run labs with F28E12* chips.  

  • 0 in reply to Milind Bapat
    TI__Mastermind 19061 points

    Hi Milind,

    Our December SDK release will include the motor control lab support for F28E12x. With this device onward, we are prioritizing integration into our MOTORCONTROL-WORKBENCH-GUI Tool so the PMSM support will leverage our automatic code generation framework

    It will support 3 power boards: BOOSTXL-DRV8323RH (low voltage three-shunt), DRV8329AEVM (low voltage single-shunt), and TIEVM-MTR-HVINV (high-voltage + PGA). I encourage you to try out the LAUNCHXL-F28E12X and also to purchase one of the mentioned power boards. If you need code, I can also provide that to you directly while we are finalizing the release 

    Regards,

    Peter