TMS320F28035 linker cmd file for flash version with CLA

andreas brandt

Prodigy 20 points

hello,

is there an example for the linker cmd file for the F28035 build as flash version with CLA support ??

all examples are for RAM-debug.

I need a Flash linker cmd file with CLA support.

I tried but don't work so far :-(((

any ideas ??

thanks

over 16 years ago

0 Lori Heustess over 16 years ago

TI__Guru* 93800 points

Andreas,

I've modified the cla_adc example that comes with the 2803x C/C++ header files and peripheral examples to load into flash.

The linker file and modified main .c file are attached.

Regards

Lori

Example_2803xClaAdc.zip

0 andreas brandt over 16 years ago in reply to Lori Heustess

Prodigy 20 points

thanks !

work fine.

0 echliristian over 16 years ago in reply to Lori Heustess

Prodigy 10 points

That worked for me too for the program code.

However I noticed that if I use the CLA Math Library. The sincos tables declared in CLASinCosTable_type0.asm don't seem to be automatically loaded in data RAM.

Since I am not a guru in assembler programing, I replaced CLASinCosTable_type0.asm with an equivalent c file and it actually works for the part that interests me (the cinit does the trick). However I would prefer to change my cmd file and/or do a memcopy than translate the whole asm file.

What is the best solution to achieve it.

Regards

Christian

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28035 linker cmd file for flash version with CLA