TMDSPLCKIT-V3 with G3 FCC

Francisco Pazos

Other Parts Discussed in Thread: AFE032, AFE031

Friends, I bought the TMDSPLCKIT-V3 kit and would like to use it in G3 FCC mode. I understood I´ll need to change the control card and afe card. Could you help me with the correct hardware I need to buy in order to use the kit in G3 FCC mode.

over 13 years ago

0 Brett Larimore over 13 years ago

TI__Guru 57255 points

Francisco,

You will need a Concerto F28M35x controlCARD as well as an AFE032 module for each PLC board.

I would recommend contacting your local TI field/sales support group for further information and help with G3 FCC PLC.

Thank you,
Brett

0 Brett Larimore over 13 years ago in reply to Brett Larimore

TI__Guru 57255 points

Francisco,

If you wish to send me your email I will have a person talk with you.

(if you wish to send me your email privately, you can add me as a friend and then send me a message with your email)

Thank you,
Brett

0 ElectronicEnthusiast over 13 years ago in reply to Brett Larimore

Prodigy 25 points

Hi Brett

I am interested in the same hardware.

Could you also send me the contact information to the person who I can contact about ordering these boards.

Thank you

Felix

0 Brett Larimore over 13 years ago in reply to ElectronicEnthusiast

TI__Guru 57255 points

Felix,

Do you have a local sales support or an FAE that you work with? If so, please ask them to send me an email and I'll help them try to figure out what is needed.

Thank you,
Brett

0 ElectronicEnthusiast over 13 years ago in reply to Brett Larimore

Prodigy 25 points

Hi Brett

Thank you for that rapid response.

Up to now I have no local sales contact, which is the reason that am posting here. We stay in Chile with our company.

Felix

0 Bin Rua over 13 years ago in reply to Brett Larimore

Prodigy 195 points

Hi TI Employee

As I know that standard TMDSPLCKIT-V3 has F28069 controlCard and AFE031 Analog Front End module. It can not perform G3-FCC. G3-FCC is supported only for F28M35x and discrete AFE module.

Can you tell me how to order TMDSPLCKIT-V3 with G3-FCC? I am living in Vietnam.

Thank you so much.

0 Brett Larimore over 13 years ago in reply to Bin Rua

TI__Guru 57255 points

Bin,

The current F28069 based kit only supports the Cenelec bands. Some additional hardware would be needed to do FCC.

TI plans to release an FCC-based PLC kit by the end of June.

Thank you,
Brett

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSPLCKIT-V3 with G3 FCC