I am using a Piccolo microcontroller and have had some problems programming the device. I was to first check and make sure that the JTAG conections are correct, but I have had some trouble finding the schematics. If someone could point me exactly to the schematic the specifies the pinout for the 14 header on the XDS100v2, I would be very appreciative. I have seen the TI JTAG connectors wiki page and the datasheet, so I think I know what the electrical connections should be. However, I have not found a document that specifies the orientation and numbering of the Pins on the emulator device header. Thanks very much for your help.
Sincerely,
James Kerwin
