Greetings!
I have a problem when debugging a board with TMS320F28015.
1. The project "Example_280xGpioToggle" for TMS320F2808 processor is imported into CCS.V5.3.0.00090 of SPRC191.
2. The project is adapted to the processor TMS320F28015. The processor is mounted on a separate printed circuit board.
3. I’m using an «SAU100-USB» emulator. Test Connection is successful.
4. The project builds and creates the file «Example_280xGpioToggle.out»
problem:
After Debug starts, CCS stops with the message (image below)
