• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 315 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Interfacing DAC with the external interface bus

Rachit Jain
Intellectual 265 points

Other Parts Discussed in Thread: TMS320F2812

Hello,

I am currently using TMS320F2812 . I have a DAC on my custom board which is connected to the f2812 via the XINTF zone 0. I know how to initialize the XINTF ,but don't know how to give the extra control signals to the DAC.

Can someone give me an example code  so that i can figure out how to go about my code.

Thanks in advance.

  • 0
    Intellectual 265 points

    Can someone give me an example code atleast showing how to use XINTF ZONE x (where x is not 7). It can be interfaced to anything.

    Looking on the net i only found out codes that use Zone 7, but i am not using it.

    So if you could please help me out.

    Thank you.

  • 0 in reply to Rachit Jain
    Guru 192875 points

    Hi Rachit,

    The issue with extra sample codes for this controller is that : this controller has already completed its support lifecycle. Hence, support for this controller would be very limited on the forum. Still I'm forwarding your query to an TI expert friend of mine.

    Regards,

    Gautam