3D models for LaunchpadXLTMS320F28069M and BOOSTXL-DRV8301

John Taylor1

Other Parts Discussed in Thread: BOOSTXL-DRV8301, CONTROLSUITE, LAUNCHXL-F28069M

Hi,

I need 3d models of the LaunchpadXLTMS320F28069M and the BOOSTXL-DRV8301 for a project I am working on. Are these files available? Step files would be the proffered file type.

-Thanks,

John Taylor

over 10 years ago

0 Manish Bhardwaj over 10 years ago

TI__Mastermind 43730 points

The BOOSTXL-DRV8301 was designed in altium , please open the design files available on the webpage and you will get a 3D model when viewing the PCB by pressing 3.

F28069 launchpad was done in eagle, you can try importing it into altium and see if it gives you a 3D model for the board,

0 Trey German289 over 10 years ago in reply to Manish Bhardwaj

TI__Mastermind 22025 points

Manish is correct. We don't have any 3D model we can just send you. If you don't have Altium, let us know and we can try to generate them for you.

0 John Taylor1 over 10 years ago in reply to Manish Bhardwaj

Prodigy 100 points

I do have Altium and was able to get the BOOSTXL 3d Files that I need. I could not, however, find the hardware design files for the F28069. Can you point me to them.

0 Trey German289 over 10 years ago in reply to John Taylor1

TI__Mastermind 22025 points

They can be found in the controlSUITE package (ti.com/controlsuite). Once installed they will be here:

C:\ti\controlSUITE\development_kits\LAUNCHXL-F28069M\HwDevPkg

C2000™︎ microcontrollers

C2000 microcontrollers forum

3D models for LaunchpadXLTMS320F28069M and BOOSTXL-DRV8301