I have two question.
I am using TMS320C28346 and i made new board within SPI-A, D interface.
The SPI-A Port is allocated serial flash and SPI-D port is communicting other likely spi-salve compatible device.
I downloading C2834x C/C++ Header Files and Peripheral Examples (SPRC876)
I check running correctly spi_loopback_interrupts example in my new board.
Then, i changed Spia register to Spid register and change interrrupt source as following
// Enable interrupts required for this example
PieCtrlRegs.PIECTRL.bit.ENPIE = 1; // Enable the PIE block
PieCtrlRegs.PIEIER6.bit.INTx7=1; // Enable PIE Group 6, INT 1
PieCtrlRegs.PIEIER6.bit.INTx8=1; // Enable PIE Group 6, INT 2
IER|=M_INT6; // Enable CPU INT6
And builing project, downloading out file in new board and Running DSP.
But, it's running incorretly at EINT; phase and exception error occour.
it has same problem in Experiment Kits(Delfino C28346 DIM168 Experimenter's Kit).
Why doesn't updated 510PP USB Emulator driver?
I use 510PP USB Emulator and CCS 3.3 with SR12
But this emulator driver is not support TMS320C28346 then i using TMS320F28335 driver
This problem is DO not USE H0~H5 SARAM region (after 0x30000)
It's maybe concerned 28335 flash memory region.
Does anyone have any idea?