TMDSDOCK28335: TMDSDOCK28335

Fadoul Souleyman

Part Number: TMDSDOCK28335

Hi,

I’m configuration an ePWM for F28335 DSP to control a 5 five level single phase inverter. I have read all the comment in the forum but unfortunately I cannot find a clear example. Please advice or give me an example of ePWM configuration that is able to generate 5 level pwm output signal.

Thanks a lot

Fadoul

over 7 years ago

0 Manish Bhardwaj over 7 years ago

TI__Mastermind 43730 points

Fadoul,

We do not have an example of five level single phase inverter.

If you have some timing diagrams etc on the PWM waveform you want to achieve. Then we can suggest as to what will be the closest example or offer advise on how to achieve it.

regards

manish

0 Fadoul Souleyman over 7 years ago in reply to Manish Bhardwaj

Prodigy 115 points

I'm looking for the solution how to configure the ePWM for F28335 in order to generate multilevel signal to control five level inverter.
Thanks
Fadoul

0 Manish Bhardwaj over 7 years ago in reply to Fadoul Souleyman

TI__Mastermind 43730 points

Fadoul,

As i mentioned if you can provide some desired PWM patterns for the 5 level , we can guide you on how to approach it on F28335.

We also have a three level PWM app note

www.ti.com/.../sprabs6.pdf

which may be a good starting point

0 Fadoul Souleyman over 7 years ago in reply to Manish Bhardwaj

Prodigy 115 points

Thank you! Can I send you my 5 level simulation in private?

0 Manish Bhardwaj over 7 years ago in reply to Fadoul Souleyman

TI__Mastermind 43730 points

Fadoul,

I am unable to offer assistance on things that cannot be posted on the forum.

I'll go ahead and close this thread.

regards
Manish Bhardwaj

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSDOCK28335: TMDSDOCK28335