TMDSCNCD28379D: Step Model for Delfino Control card

Jens Kroitzsch

Prodigy 10 points

Part Number: TMDSCNCD28379D

Hi out there,

does anyone have a 3D model of the TMDSCNCD28379D Delfino Control Card?

A very simple one showing only the outer shape but including all connectors and switches would be preferred.

I need to insert it as a component into the design for a mother board, to produce a 3D model of the whole assembly.

Also, I would be glad if anyone had a KICAD schematic for the board or a hint how the PADS schematic could be converted.

Thank you for any ideas,

Jens.

over 7 years ago

0 Peter Galicki over 7 years ago

TI__Expert 8105 points

Jens,

I am not aware of a step model for this CC, will investigate further and get back to you tomorrow

Regards,

PEter

0 Peter Galicki over 7 years ago in reply to Peter Galicki

TI__Expert 8105 points

Jens,

I verified that we do not have a step model for this CC. If you have access to Altium tool, you can import the CC database into Altium and export the step model out of Altium.

Regards,
PEter

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSCNCD28379D: Step Model for Delfino Control card