Part Number: TMS320F28069
Other Parts Discussed in Thread: MOTORWARE
Tool/software: Code Composer Studio
Dear All
I have a problem when I build my project in CCS.
I use TMS320F28069 which have a CLA co processor. In the debug window I see that CLA core isn't connected as mentioned in below PIC.
Please guide me what I should to do?
Main core C28xx is Connected :
Wish you All the best.
Rasool
Hi Sudhakar,
Thank you for your response. I did it and it Connected, but another error (no symbols are defined for "0x9000" ) mentioned by software.
In the console window write: "CLA_0: Can't Run Target CPU: (Error -2060 @ 0x0) Requested operation cannot be done while device is running. Halt the device, and retry the operation. (Emulation package 6.0.407.3)" when i resume the code.
Should i define a gel file for this CLA_0 when i adjusting project setup?
unfortunately, I don't have any gel file for this co processor.
This is one PIC of my project:
