LVSERVOMTR: About the motor specifications of TI's 2MTR-DYNO InstaSPIN-FOC Evaluation Module

Elisa Baldassari

Part Number: LVSERVOMTR

Hi! I have troubles with understanding the difference between electrical interfaces in the specs of the motor, in particular the difference between (S/E/W) and (P/C/Y), could you please clarify this to me? Thank you!

over 5 years ago

0 Yanming Luo over 5 years ago

TI__Guru** 109730 points

Sorry. Could you please have more information about your question? What do you mean (S/E/W) and (P/C/Y)?

I suppose you mean ENC A/B/I and ENC A~/B~/I~. They are the complementary signal, you could use either one or use both as a differential input.
Btw, COMM R-S/S-T/T-R is the output signal from hall sensor.

0 Elisa Baldassari over 5 years ago in reply to Yanming Luo

Prodigy 70 points

No I don't mean neither the ENC nor the COMM; in the PDF file that I have attached there are some parameteres that are different depending on the electrical interface used (first line of the specifications)

0 Yanming Luo over 5 years ago in reply to Elisa Baldassari

TI__Guru** 109730 points

You might find the description in the datasheet, it's a different electrical interface on windings. You might ask the question to the motor manufacturer to get a more clear information. The bundled motor of TI kit is 2310P.

C2000™︎ microcontrollers

C2000 microcontrollers forum

LVSERVOMTR: About the motor specifications of TI's 2MTR-DYNO InstaSPIN-FOC Evaluation Module