CCS/TIDM-1007: CCS doesn't respond

Masaharu Takahashi

Expert 4170 points

Part Number: TIDM-1007
Other Parts Discussed in Thread: POWERSUITE

Tool/software: Code Composer Studio

hi, Team.

my CCS haven't still worked properly.

since the thread has been locked so that i post here.

let me comment i got last on previous e2e.

Could you double-check if the "Language for non-Unicode programs" setting in your machine is set to English? As per these web references (here and here) this setting could be converting the "\" to yen symbol and maybe that is impacting the installation.

[MASA]yes. i did.

all of japanese customer's laptop is japanese language and it has to be needed to solve it problem from our software side otherwise no one can use our solution.

see previous e2e.

over 7 years ago

0 Ozino Odharo over 7 years ago

TI__Mastermind 21600 points

Masaharu,

e2e.ti.com/.../2294246 Can you take a look a this forum post and see if you are able to gain additional insight. In the meantime, I will consult with the team regarding this issue.

Regards,
Ozino

0 Masaharu Takahashi over 7 years ago in reply to Ozino Odharo

TI__Expert 4170 points

yes i've seen it and touched with ted directly but not solve this problem.

just i want to ask you.
so far i dont have TI design board and can't connect with my laptop since i gave it to my customer.
in order to check CCS and C2000 SDK, should I connect my laptop with TIDM-1007 to see how it works ?

0 Ozino Odharo over 7 years ago in reply to Masaharu Takahashi

TI__Mastermind 21600 points

You should be able to at least open the solution in CCS and configure the example using powerSUITE. You should be able to run it on a controlCARD with a docking station just to make sure it runs. It won't run as expected but it should be able to load it to the device.

-Ozino

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TIDM-1007: CCS doesn't respond