CCS/LAUNCHXL-F28069M: Launchxl-F28069M and DRV8305EVM

Krishnatreya Bhattacharya

Part Number: LAUNCHXL-F28069M
Other Parts Discussed in Thread: BOOST-DRV8711

Tool/software: Code Composer Studio

As a beginner I would like to rotate a NEMA 23 stepper motor using LaunchXL-F28069M and DRV8305EVM.How should I proceed?

Thanks & regards,

Krishnatreya

over 6 years ago

0 Yanming Luo over 6 years ago

TI__Guru** 115490 points

What is the connection type of this stepper motor? Often, the 2-phase stepper needs 2 H-bridge power module to implement the drive control. The DRV8305EVM is a 3-phase half bridge that can't support this 2-phase stepper motor directly.

You might find a right drive based the voltage and power requirement of your stepper motor.
www.ti.com/.../products.html

0 Todd Anderson78572 over 6 years ago in reply to Yanming Luo

Guru 14640 points

FYI - It looks like the BOOST-DRV8711 Stepper Motor BoosterPack is compatible with the LAUNCHXL-F28069M Launchpad.
dev.ti.com/.../

0 Yanming Luo over 6 years ago in reply to Todd Anderson78572

TI__Guru** 115490 points

I haven’t heard back from you for a week, I’m assuming you were able to resolve your issue. If not, just post a reply below (or create a new thread if the thread has locked due to time-out). Thanks.

0 Krishnatreya Bhattacharya over 6 years ago in reply to Yanming Luo

Prodigy 90 points

Sorry for the delay...my issue has been resolved.Thank you for your response.\

Krishnatreya

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/LAUNCHXL-F28069M: Launchxl-F28069M and DRV8305EVM