This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SM320F2808-EP: Boundary Scan help

Part Number: SM320F2808-EP
Other Parts Discussed in Thread: TMS320F2808,

I'm looking to do some boundary scan tests with the SM320F2808-EP micro.  I found a .bsm file for the TMS320F2808 part which appears to be the same thing, but I'm not sure if that can be used on the SM320F2808.

Also, long term I'm looking to use/create a .svf file, is there any information available on how to create this file?

  • Brandon,
    the PZ package BSDL model can be used for the EP version. The silicon design is the same.

    I am not an expert with using .svf files. However, I believe this would be more focused on the JTAG tools that you are going to use to test the boards. I would suggest working with the vendor of your JTAG tools for assistance on creating .svf patterns to accommodate your testing.

    If this answers your question, please click "Verify it as the answer"
    Regards,
    Wade