• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 440 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28379D: Cable connector for J9 on the Launchpad

Gobind Singh
Intellectual 720 points
Part Number: LAUNCHXL-F28379D

Hi,

Is there any cable connector available for the J9 connector on the Launchpad LAUNCHXL-F28379D. The J9 connector is toooo small to solder wires to it.

I searched on the internet and on the forum, I found a thread which suggests to use DF40HC(4.0)-60DS-0.4V(51). This is a board to board connector. I am looking for a connector which can just give us more space to probe or solder wires to it.

Could you please suggest a connector for that?

Thank you.

  • 0
    TI__Expert 8105 points

    Gobind,

    I think your best bet would be to use the board-to-board connector and build a custom board from which you can access individual signals. We do not now of any ribbon-cable style connector from which you can access signals. I think this is an inherent limitation of this connector being a board-to-board connector.

    Regards,
    PEter