• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 604 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LVSERVOMTR: Interface definition

F.F
Genius 3095 points
Part Number: LVSERVOMTR

Dear team:

I have seen the specification of Teknic LVSERVOMTR, but there are still some pins whose signal sources are not very clear.

What is "P DRAIN" and "E DRAIN" of pin 1&6? And what is "COMM S-T", "COMM R-S", "COMM T-R"?

Best regards

  • 0
    TI__Guru** 109780 points

    You don't need to care these signals if you just control the motor using sensoless-FOC or A/B/Z encoder.

    P-DRAIN is the central point of "Y" type connection of the motor, and "COMM S-T", "COMM R-S", "COMM T-R" are the output signals of the Hall sensor as shown in its datasheet.

    You may also contact the motor manufacturer if you want to know more information.