This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28376D: issues in flash writing & reading

Part Number: TMS320F28376D
Other Parts Discussed in Thread: C2000WARE

Hi everybody , 

I m on F28376D .   I m for legacy on C2000ware  and CCS 8 .

now I write  flash and need to read back fro cross check .

my programs hangs  after reading about  90 words (  i tested the same moving starting writing locations )  :  what I  read and see in my variable is 0x0D00  vs     correct value  which is 0x8D00 .

issue I see is that memory view   confirms me locations is properly written  ( in there I see proper value 0x8d00 ) .

see attched picture  with highlighted in red the memory view and the variable with the mismatch .

where am I wrong ?  what should I check ?

I am using API and put some extra Nop in flash .  I started from C2000 ware example so not touching any flash settings .

best regards