• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 450 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Measurement Endat Angel

TIDM-1008: TIDM-1008 COMPATIBALITY WITH LABVIEW SOFTWARE

Basavaraju DK
Prodigy 30 points
Part Number: TIDM-1008
Other Parts Discussed in Thread: CONTROLSUITE

is the TIDA-1008 card  read through LABVIEW software,we use hiedenhain encoder for our testing purpose,we want interfacing card such that its should be compatible with ENdat 2.2 and Labview should be able to get the information .so kindly share the answer whether the module is able to interface with labview software and endat 2.2 as well,

thank you

  • 0
    TI__Mastermind 24095 points

    Hi,

    I'm not sure what your question exactly is about. What exactly are you using LabView for?
    And what compatibility are you interested in?
    Software for the kit is available under 
    C:\ti\controlSUITE\development_kits\BOOSTXL_POSMGR\v01_01_00_00\endat22-F28379DLpad-S2
    It's a C-code comprising of an example and a pre-compiled library available in the same location.
     

  • 0 in reply to Subrahmanya
    Prodigy 30 points

    Hi,

    We are setting up a lab ,We want to use labview software for measuring encoder ,Our encoder uses enDAT 2.2 protocol,So we need a inerfacing card which can read endat protocol and push the values to labview software ,Does your TIDA 1008 module can read the encoder data and able to push the values to labview software.

  • 0 in reply to Basavaraju DK
    TI__Mastermind 24095 points

    Hi,

    As I've mentioned in previous post - you need to use the software provided for EnDat22 interface support.
    I guess that LabView software you mentioned above is an additional layer over and above this.
    TIDA 1008 only supports the EnDat22 interface software. You'll have to develop your own interface for LabView.