• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 81 subscribers
  • Views 218 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28076: CLB tool missing the repetition / emulation part of the encoder signals

Antonio Faggio
Expert 6820 points
Part Number: TMS320F28076
Other Parts Discussed in Thread: C2000WARE, TMDXIDDK379D

Hi Chris,Hi All,

My motor drive customer is an early adapter of CLB tool since July 2019 and would like to know whether there is any update on the CLB of 28076.

At the moment, customer is missing the repetition / emulation part of the encoder signals.

 

If I remember correctly, before the end of the year the libraries for the CLB that manage this part should be available, correct? Do you know anything about it?

 

Then again customer would like to know anything with regards to the sources of the CLB libraries.

As you know, it would be very convenient for customer to have them, to better adapt them to customer needs.

 

If there is any news could you please share with me?

Many Thanks,

Antonio

 

  • 0
    TI__Mastermind 24095 points

    Hi Antonio,

    Regarding the encoder solution, it's currently available (for t-format) in the MotorControlSDK released in Nov19.
    This is no more a pre-compiled library and all the source code for implementation is available on SDK.
    C:\ti\c2000\C2000Ware_MotorControl_SDK_2_01_00_00\libraries\position_sensing\tformat
    C:\ti\c2000\C2000Ware_MotorControl_SDK_2_01_00_00\solutions\boostxl_posmgr\f2837xd\ccs\tformat
    Customer can use this and make any changes to software, pin-assignment or any other aspects.

    Also, there is IDDK integrated project for tformat at
    C:\ti\c2000\C2000Ware_MotorControl_SDK_2_01_00_00\solutions\tmdxiddk379d\f2837x\ccs

    No release date has been set for rest of the protocols yet - current estimate is to be released in 1Q20. 

    In general, with the release of the tool, there will not be any library based approach moving forward, allowing customers to develop on their own.