Hi everybody ,
please is there anything to respect between the two rails during power on and power off ?
both in V and in timing ?
best regards
Carlo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi everybody ,
please is there anything to respect between the two rails during power on and power off ?
both in V and in timing ?
best regards
Carlo
Hi Carlo,
Yes, proper power sequencing needs to be followed. Please refer the section "Power Sequencing" in the data sheet.
http://www.ti.com/lit/ds/symlink/tms320f28376d.pdf
Regards,
Nirav