CCS/BOOSTXL-BUCKCONV: Compensation Designer + SFRA, using LAUNCHXL-F280049C

Helmut Wagner

Part Number: BOOSTXL-BUCKCONV
Other Parts Discussed in Thread: LAUNCHXL-F28069M, , SFRA, POWERSUITE, LAUNCHXL-F280049C

Tool/software: Code Composer Studio

Hello!

TI System Engineer Hrishi Nane explains BOOSTXL-BUCKCONV project, based on launchxl-f28069m in video "Digital Power Buck Converter BoosterPack Out of Box Demo" , posted 2015.
Meanwhile, Launchpad and Softwarepackage design for BUCKCONV has been changed & enhanced by TI.
Unfortunatly, I am not able to transfer Compensation Designer and SFRA feature to current environment (since I am new to TI projects).

Would you mind to support me in this task, please?

BR Helmut

over 3 years ago

0 tlee over 3 years ago

TI__Guru 62975 points

Helmut,

As you have mentioned, just about every component in the tool chain (CCS, powerSUITE, drivers, etc) has been updated since the 2015 video was made.

If possible, I recommend using the LAUNCHXL-F280049C solution that is found in the Digital Power SDK. The TIDM-DC-DC-BUCK design guide provides a walk through for this solution that is targeted for new developers.

-Tommy

0 Helmut Wagner over 3 years ago in reply to tlee

Prodigy 80 points

Tommy,

I confirm, walking through of TIDM-DC-DC-BUCK design guide is an easy going one.
I am able to reproduce nearly all of the reference values, including SFRA and CompensationDesigner.
Excellent done!

Thank you very much for your support.

-Helmut

PS this issue can be closed.

0 tlee over 3 years ago in reply to Helmut Wagner

TI__Guru 62975 points

Helmut,

Thanks for the feedback. I'm happy to hear that the guide was helpful!

-Tommy

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/BOOSTXL-BUCKCONV: Compensation Designer + SFRA, using LAUNCHXL-F280049C