• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 851 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Hardware setting for ePWM in TMS320F28044

Saqib Saleem
Prodigy 20 points
Other Parts Discussed in Thread: TMS320F28044

Hi,

I am using Tms320F28044 and designing a board for that. I have to use PWM for which GPIO0-15 are assigned for that. I am using this PWM to drive another external Circuit. I just want to clarify my doubt that whether external pull-up resistor is required or not. Current requirement is 2 mA only. And how much is the value of the internal pull-up resistor.