This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28067: Are there any restriction of the place we put stack to?

Part Number: TMS320F28067
Other Parts Discussed in Thread: C2000WARE

Hi,

my customer find that for the same project, if they put  .stack to higher than 0xffff, the project will run into illegal trap.

for example .stack : > RAML7, PAGE=1

RAML7 is from 0x10000 to 0x12000.

But if they put stack to place lower than 0xffff, there won't be such problem.

Are there any restriction where we put .stack into? What may cause the problem?