This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMDSCNCD28035: Piccolo F2803x

Part Number: TMDSCNCD28035

Tool/software: Code Composer Studio

I'm a new user of the Piccolo u-controller.  I need to talk with an expert about getting this system working as advertised in the Piccolo workshop documentation.  Could you please contact me to set up a phone meeting to get me over the impediments I'm facing?  dan@renewpower.us 

  • Dan,

    Thanks for reaching out to us on the E2E forum.  Could you elaborate a bit more on the specific part of the workshop that is not working with the F28035 control CARD, and we can see the best way to proceed and who from the factory can be best positioned to address your concern. 

    I would like to keep this on the forum for the time being, if we see this being an impediment to getting the resolved in a timely manner we can see what other avenues we can use to get your concerns addressed.  

    Best,

    Matthew