• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 81 subscribers
  • Views 1054 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28388D: Reading Nikon A Format Encoder - F28388D

Long Pham Tan
Intellectual 321 points
Part Number: TMS320F28388D
Other Parts Discussed in Thread: TIDM-1011

Hi, 

I am using some motor Encoder with Nikon A - format interface. I have read some posts in E2E forum and TI support team recommends using CLB tool to perform A - format.

Is there document or tutorial to guide this tool to perform A - Format? Or TI has release library for A format interface similar to T format, Biss C?

Thanks,

  • 0
    TI__Guru* 89465 points

    Hello, 

    Take a look at The Essential Guide for Developing With C2000™Real-Time Microcontrollers (www.ti.com/lit/SPRACN0). 

    In the section Realizing Rotary Sensing Solutions using the CLB (currently section 2.5) the document describes all of our available resources in this area.  This includes the TIDM-1011 which is our C2000 T-format reference design which you can leverage for the Nikon format.  You will also find a list of related documentation (section 2.5.5) for the CLB, CLB tool and designing with the CLB.

    Regards

    Lori