Other Parts Discussed in Thread: C2000-GANG, , UNIFLASH
Tool/software: Code Composer Studio
My customer is using C2000-GANG and TMS320F28031.
The blank chip is successfully programmed for the first time, and the following error message is displayed when the chip that has been programmed again is programmed.
He tried C2000_GANG power off and restart, but the following error is still displayed.
The same hex file can be burned repeatedly with uniflash and C2prog; it can also be burned normally with the burner of xds100v2.
Customers have tried to reduce the speed of JTAG, the phenomenon is the same as above.