• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 81 subscribers
  • Views 757 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMDSCNCD28035: C28xx: Error connecting to the target: (Error -1015 @ 0x0)

Avi P
Expert 1100 points
Part Number: TMDSCNCD28035

Tool/software: Code Composer Studio

Hello there

I am trying to load the code into the TMDSCNCD28035 control card but when I tried to debug the code I got an error "C28xx: Error connecting to the target: (Error -1015 @ 0x0) Device is not responding to the request. Device may be locked, or the debug probe connection may be unreliable. Unlock the device if possible (e.g. use wait in reset mode, and power-cycle the board). If error persists, confirm configuration and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 9.2.0.00002)"

Thanks

Avi