This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-HV-1PH-DCAC: 3kW Layout Redesign

Part Number: TIDM-HV-1PH-DCAC
Other Parts Discussed in Thread: TIDA-01604, TIDA-01606

Hey Team,

I have a customer that is looking for an off-grid voltage mode inverter that can provide 3000W single phase as 110VAC and can also adjust to 240VAC. We can stack inverters in parallel or can use one inverter.

We are considering the TIDA-01606, TIDA-01604, and TIDM-HV-1PH-DCAC currently. The TIDM-HV-1PH-DCAC seems to work for this application, but would need a new layout to meet the 3kW spec. What component changes are needed for this redesign? What assistance can we provide to help with this redesign?

Best,
Dajon McGill

  • Dajon, 

    I'll suggest reaching out internally to answer 

    "What assistance can we provide to help with this redesign?"

    The goal of the design is to get customers started with the use of C2000 MCU. We do help with the firmware side to scale the design to a different power level by providing incremental builds. We do not provide an end to end solution for voltage mode inverters. The customer will need to understand and own the design, see TI Designs Disclaimer. 

    -Manish