This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280023: Device cannot boot to flash

Part Number: TMS320F280023

Hi team,

I am supporting my customer doing F280023 development. And we noticed the device cannot boot to Flash.

Even if we lead to Main() via CCS, the code would stuck at 0x3F4751 even after a free run. Seems a reset happened after the free run.

The customer is using EABI output format. What I've suggested them to try:

1. Add entry_point as code_start in project properties;

2. Disable WD in f28002x_codestartbranch.asm;

The boot to flash still does not work.

Attaching CMD and MAP file FYI. It looks fine from my side.

Any suggestions?

Files.7z

Regards,

Brian