TMS320F28335: TMS320F28335

James Pinto

Part Number: TMS320F28335
Other Parts Discussed in Thread: C2000WARE

Hi, I have two F28335 controllers placed on two seperate development boards. How can i communicate between the two controllers?. I have a RS232 ports and an JTAG on each of the development board.

Request your suggestions.

Thank you

over 3 years ago

0 Marlyn Rosales Castaneda20 over 3 years ago

TI__Mastermind 22810 points

Hi James,

Please take a look at the SCI module. SCI is a two−wire asynchronous serial port, commonly known as a UART. Information for the SCI module on the F28335 device can be found within the Technical Reference manual (TRM). Also, we do have software examples available within our software platform, C2000Ware.

C:\ti\c2000\C2000Ware_version\device_support\f2833x\examples

Best Regards,

Marlyn

0 James Pinto over 3 years ago in reply to Marlyn Rosales Castaneda20

Prodigy 230 points

Hi Marlyn,

Thank you for the reply. I have downloaded the C2000 ware.

The F28335 is mounted on a custom board developed by OPAL RT and there are AI, DI, DO, CAN and RS232 interfaces available.

I think I should go ahead with the RS232 for inter DSP communication. Any suggestions for this approach are welcome.

Thank you.

James

0 Marlyn Rosales Castaneda20 over 3 years ago in reply to James Pinto

TI__Mastermind 22810 points

Hi James,

The examples within C2000Ware will be a good starting reference for your communication, software wise. Please let me know if you have any specific questions and I can assist further.

Best Regards,

Marlyn

0 James Pinto over 3 years ago in reply to Marlyn Rosales Castaneda20

Prodigy 230 points

Thank you Marlyn. Will raise a post if I have any queries.

Thank you .

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28335: TMS320F28335