TMS320F28027: Reroute printf to SCI

David Dominguez Moises

Part Number: TMS320F28027
Other Parts Discussed in Thread: C2000WARE

HI,

I have my own print function to use UART for my application. So far I have only worked on sending strings, but would be easier to reroute printf to SCI peripheral for any type of formatting.

Is there any doc explaining this already? Or any example project?

Thanks,

David

over 3 years ago

+1 Marlyn Rosales Castaneda20 over 3 years ago

TI__Mastermind 22810 points

Hi David,

We don't have any documentation for this specifically, but you could refer to the example below within C2000Ware (it utilizes the printf function)

C:\ti\c2000\C2000Ware_version\device_support\f2802x\examples\drivers\C2kLaunchPadDemo

Best Regards,

Marlyn

0 David Dominguez Moises over 3 years ago in reply to Marlyn Rosales Castaneda20

Intellectual 560 points

Thanks, will take a look. Should not be complicated, just wanted to see if there was any docs already.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28027: Reroute printf to SCI