Is there any write-up (notes, suggestions, etc) on how to accommodate an SSI device (e.g., absolute encoder) to either the SPI or GPIO for this controller? Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Is there any write-up (notes, suggestions, etc) on how to accommodate an SSI device (e.g., absolute encoder) to either the SPI or GPIO for this controller? Thanks.
Hi Bogdan,
I would recommend taking a look at the following thread:
https://e2e.ti.com/support/microcontrollers/c2000/f/c2000-microcontrollers-forum/880443/tms320f28377s-interface-with-32-bit-ssi-encoder
Hopefully this helps!
Thank you,
Brett