TMS320F28069M: How to program eeprom of programmer XDS100V2

Dave Hunson

Expert 1720 points

Part Number: TMS320F28069M
Other Parts Discussed in Thread: TMDSCNCD28069ISO

Hi everyone!

recently I made Programmer base on

C:\ti\controlSUITE2_DMC Rev\development_kits\~controlCARDs\TMDSCNCD28069ISO_v1_1\R0_4

but sadly it is not working

I think the 93C56 needs to be programed am I right?

if so ,would you please tell me who to do that ?
is there any thing else that I need to know for making such a kind of program & emulator?

thanks for attention.

Dave.

over 3 years ago

0 MatthewPate over 3 years ago

TI__Guru 71835 points

Dave,

You are correct that the EEPROM needs an image. I've attached the files(along with a batch file) that should program the FTDI EEPROM to use as XDS100v2 with serial back channel.

Best,
Matthew3731.xds100v2-FT_Prog_v2.2.zip

0 Dave Hunson over 3 years ago in reply to MatthewPate

Expert 1720 points

thanks dear .

I am have another Home made programmer base on XDS100v1 which I took it from HVKit.v2.1(yellow PCB)

it is used FT2232D along with 93lc46 would you please tell me how to program FT2232D & 93lc46 thanks for your help

Best.

Dave.

0 Dave Hunson over 3 years ago in reply to MatthewPate

Expert 1720 points

One more question:

how can I program it ,is that via USB Cable that directly connected to FT2232D ,or any other Interface is need it?

I saw in some comment that said CPLD need it ?
would you please take a time and explain for me thanks.

Best.

Dave.

+1 MatthewPate over 3 years ago in reply to Dave Hunson

TI__Guru 71835 points

Dave,

This thread gives directions on programming for XDS100v1 https://e2e.ti.com/support/microcontrollers/c2000/f/c2000-microcontrollers-forum/21086/important----c2000-experimenter-kit-dual-rs232-fix

Yes, these can all be done via the same USB connection you have listed in your schematic. I think the link above will explain this a bit more completely for both cases(the XDS100v2 batch method is a bit less involved).

Best,

Matthew

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28069M: How to program eeprom of programmer XDS100V2