This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BOOSTXL-BUCKCONV: getting Vin sensed and overall project to work

Other Parts Discussed in Thread: SYSCONFIG


I'm trying to get BOOSTXL-BUCKCONV to work together with a f280049c launchxl following documentation. I feel i get everything right to the point when I run the project and shoud sense Vin at 0V then toggling the SW1 on the boostXL should get me my input supply voltage. but before and after the switch I get about 0.4V all the time. and obvisouly no Vout. please help